 |
 |
 |
|
The most important features: - Range: 2in to 265ft (80 meters)
- Accuracy ± 1.0 mm (better than 1/16th in.)
- Area calculation
- Volume calculations
- Pythagoras 2-point and 3-point measurements
- Stake out function (1value)
- Memory (last 10 results)
- Multifunctional end piece with automatic detection
- IP54 (dust and splash water protected)
- Power Range Technology
- 3-line illuminated display
 | - Leica DISTO™ E7300 laser distance meter
- Holster
- Hand loop
- Batteries
|
| Technical specifications: | | | Typical measuring accuracy | ± 1 mm or .040 inch (1/25th") | | Range | 265 ft (80 m) | | Measuring units | 0.000 m, 0.0000 m, 0.00 m, 0.00 ft, 0‘00‘‘ 1/32, 0.0 in, 0 in 1/32 | | Power Range Technology™ | • | Distance in m
Ø of the laser dot in mm | 10, 50, 100 m
6, 30, 60 mm | | Protection class | IP54 – dust and splash water protected | | Measurements per set of batteries | up to 5000 | | Batteries | type AAA 2 × 1,5 V | | Dimensions | 4.49 x 1.97 x 1.06 in | | Weight with batteries | 3.34 oz |
| Functions: | | | Min/max measurement | • | | Continuous measurement | • | | Stake out function | • | | Addition/subtraction | • | | Area/volume | • | | Painter function | • | | Pythagoras | 2 and 3 points | | Memory | 10 Results | | Illuminated display | • | | Multifunctional end-piece | with automatic recognition |
Distagage Disto E7300 (European version shown in video)
Distagage E7300 Triangulation (European version shown)
Distagage Disto E7300 Area Measurements (Euro version shown)
Distagage E7300 Min/Max Feature (Euro version shown)
|
Leica Disto
E7300
Technical
Specifications |
|
Distance Measurement |
|
Typical
Measuring Tolerance* |
± 1.0 mm/0.04 in*** |
|
Maximum
Measuring Tolerance** |
+/- 2.0 mm/
0.08 in*** |
|
Range to
Leica target plate GZM26 |
100m/328 ft |
|
Typical
Range* |
80m/262 ft |
|
Range with unfavorable conditions |
50m/ 164 ft |
|
Smallest Unit Displayed |
0.1 mm / 1/32 in. |
|
Power Range Technology |
Yes |
|
Diameter of
laser
point
(at distances) |
6 / 30 /
60 mm
(10 / 50 / 100 m) | | General |
|
Laser Class |
2 |
|
Laser Type |
635 nm, <1 mW |
|
Protection Class |
IP65 (dust tight and jet water protected) |
|
Automatic laser switch off |
after 90 seconds |
|
Automatic power switch off |
after 180 seconds |
|
Battery durability (2 x AAA) |
up to 5000 measurements |
|
Dimension (H x D x W) |
114 x 50 x 27 mm 4.49 x 1.97 x 1.06 in. |
|
Weight (with batteries) |
104 g / 3.34 oz. |
|
Temperature range:
Storage
Operation |
-25°C up
to +70°C
(-13°F up to +158°F)
-10°C up to +50°C
(14°F up to +122°F) |
|
Functions |
|
Distance
measuring |
Yes |
|
Min/Max
measuring |
Yes |
|
Permanent (continuous) measuring |
Yes |
|
Stake-out function |
Yes |
|
Addition
/ Subtraction |
Yes |
|
Pythagoras / Indirect / Triangulation functions |
3 |
|
Area |
Yes |
|
Triangle Area |
No |
|
Volume |
Yes |
|
Painter function (area with partial measurement) |
Yes |
|
Smart Horizontal Mode/ Indirect Height |
No |
| Height tracking |
No |
|
Memory |
10 results |
|
Beep |
Yes |
|
Display
illumination |
Yes |
|
Automatic Multifunctional endpiece |
Yes |
|
Timer
(self-triggering) |
No |
|
Tripod
thread (Type: 1/4-20, female) |
No |
|
Battery
life,
Type AAA, 2 x 1.5V |
up to
5 000 measurements |
* applies for 100 % target reflectivity (white painted wall), low ambient light, 25 ºC ** applies for 10 to 500 % target reflectivity, high ambient light, - 10 ºC to + 50 ºC *** Tolerances apply from 0.05 m to 10 m with a confidence level of 95%. The maximum tolerance may deteriorate to 0.1 mm/m between 10 m to 30 m and to 0.15 mm/m for distances above 30 m **** applies for 100 % target reflectivity,
|
|
|
 |
|
 |
|
